TUMI LOCKS
Maximize your security
Your new TSA-approved combination padlock is preset to open at 0-0-0 (even though the dials may be positioned at other numbers). You can change and reset your combination as often as you like.
Keep your combination in a safe and accessible place for future reference. This lock was designed to be recognized by the U.S. Transportation Security Administration, TSA, and allows the TSA to be able to unlock your bag, using special access codes and tools, if the need arises for a baggage search. This lock can then be relocked by the TSA with no damage to the lock or your bag.
Padlock
Step 1
Start by ensuring every digit on your dial is set in
the preset starting code at 0-0-0.
Step 2
Use a ballpoint pen to push the reset button on the
bottom of the lock and hold down while adjusting each number on your
three-digit dial.
Step 3
When you have finalized your new code, release your
ballpoint pen’s pressure on the reset button to set the new combination.
Step 4
Open the lock by entering the set combination on the
dial and pressing down on the unlock button.
Dual Integrated Lock
Step 1
Start by ensuring your dial is set in the preset
starting code 0-0-0 by releasing the zipper pullers from their housing. To
do this, slide the TSA Lock as indicated by the arrows to unlock the
zippers.
Step 2
Now that the preset code is confirmed, return the
zipper pullers into the housing.
Step 3
Use a ballpoint pen to press down the reset button
located next to the dial. After pressing down on the reset button, adjust
each dial to your preference.
Step 4
When you have finalized your new code, push to slide
the TSA Lock as indicated by the arrows. This causes the reset button to
spring up and release the zipper pullers which confirms your new code is
set.
Integrated Lock
Step 1
Start by making sure every digit on your dial is set
in the preset starting code at 0-0-0.
Step 2
To reset your code, use a ballpoint pen to press down
the reset button. After pressing down on the reset button, adjust each dial
to your preference.
Step 3
When you have finalized your new code, press down on
the large release button, located to the right side of the TUMI logo. If the
zippers pop out from the zipper pull, you have correctly set your lock.
Low Profile Integrated Lock
Step 1
Start by ensuring every digit on your dial is set in
the preset starting code at 0-0-0.
Step 2
Use a ballpoint pen to push the reset button on the
bottom of the lock and hold down while adjusting each number on your
three-digit dial.
Step 3
When you have finalized your new code, release your
ballpoint pen’s pressure on the reset button to set the new combination.
Step 4
When you have finalized your new code, release your
ballpoint pen’s pressure on the reset button.
Step 5
Now you have correctly set your lock. To test this,
slide the TSA lock as indicated by the arrows to unlock the zippers.
Snap Latch Lock
Step 1
Start by ensuring every digit on your dial is set in
the preset code 0-0-0. Press the release button on side to open the lock.
Step 2
Once lock is open, use a ballpoint pen to press down
on the reset button on the top of the lock. After pressing down on the reset
button, adjust each dial to your preference.
Step 3
When you have finalized your new code, press on the
release button again. The reset button will spring up which confirms you
have set your new code.
Briefcase Lock
Step 1
Start by making sure every digit on your dial is set
in the preset starting code at 0-0-0.
Step 2
Use a ballpoint pen to push the reset button on the
bottom of the lock and hold down while adjusting each number on your
three-digit dial.
Step 3
When you have finalized your new code, release your
ballpoint pen’s pressure on the reset button to set the new combination.
Step 4
Open the lock by entering the set combination on the
dial and pressing down on the unlock button.